HWID SPOOFER

HWID Spoofer Manual

Complete hardware ID spoofing guide

Step 1: Windows Reinstall

A clean reinstall of Windows removes leftover tracking files and anti-cheat traces. This ensures a fresh, stable system environment for a smooth setup.

Windows Reinstallation is Required - this step will clear all your data.

Use GHOST Spectre - Recommended

Before reinstalling Windows, download your Wi-Fi drivers from your motherboard's official support page and save them to the same USB drive you'll use for the installation.

Reinstallation Steps - Ghost Spectre

1. Create a USB with GHOST Spectre Installation

Download Ghost Spectre: Download Ghost Spectre
After downloading, drag the ZIP to your USB
Extract all the files from the ZIP, and delete the ZIP itself

2. Booting to Windows Installation

Hold SHIFT and click Restart
Select Use a Device and select your Flash Drive

3. Installing Ghost Spectre OS

Press on the First Windows Icon
Select Ghost Spectre, Select Windows 10 Pro 22H2 – Superlite + DEF
Select Custom: Install Windows only (Advanced)

4. Cleaning Disks

To perform a thorough clean installation, use the following advanced steps:

Press Shift + F10
Type diskpart into the CMD
Type select disk # (for every disk number) and clean for every disk you have except your Flash Drive
Close the CMD and click Refresh
Select your Main Drive (Labeled Unallocated Space)
Click Next to continue the Windows Installation process
Don't connect to the internet until the setup is finished

5. Using Ghost Spectre

Open Ghost Toolbox
Apply the recommended options
Do the Notes on the bottom right, before continuing

You have successfully installed Ghost Spectre.

Important Guidelines When Playing Spoofed Games

Unplug all flash drives before launching the game
Do NOT log in to Microsoft accounts
For EAC & RICOCHET Only: Avoid logging into Logitech G HUB, GeForce Experience, Razer Softwares, Medal (or any similar apps)

Step 2: Disable Windows Defender

Disable Windows Defender to avoid it blocking or interfering with the spoofer.

Using dControl

Download dControl from the link below
Extract it and Run it
Run dControl as Administrator
Disable Windows Defender
Confirm Status in dControl or Windows Security to ensure Defender is OFF

Download dControl:

https://content.gitbook.com/content/GX215IYet7df7lTywp3p/blobs/8VIaLdTwubOA0G2iVJAR/DControl.rar

Password: sordum

Step 3: Disable Windows Updates

Pause or turn off Windows updates temporarily to prevent unexpected restarts, errors, or interruptions while using the Spoofer.

Download Windows Update Blocker (WUB) from the provided download below
Right-click the downloaded .zip file and choose Extract All (Preferred WinRAR)
Open the extracted folder
If you're on a 64-bit system (most modern PCs), run Wub_x64.exe
In the program window, select Disable Updates
Click Apply Now to enforce the setting

Download Windows Update Blocker:

Download WUB

Password: sordum

Step 4: BIOS Setup

Required BIOS setup steps for all motherboards.

Flash BIOS (Update Twice)

Update the BIOS first to a different version and then to another different version, meaning you must update the BIOS twice in total. (If you only have one BIOS version, update it twice using the same version.)

Download your BIOS file from the manufacturer's site
Go into your BIOS
Flash it to a newer or older version, never the same one
After the first flash, repeat the process and flash the same BIOS file again
Unplug your USB stick after flashing the BIOS

BIOS Flash Tutorials:

MSI: https://www.youtube.com/watch?v=sKMub20CUNI

Gigabyte: https://www.youtube.com/watch?v=G5qNItBXn-g

ASUS: https://www.youtube.com/watch?v=Em7SRaG3L_0

BIOS Settings Configuration

Enable TPM

Enable TPM (Security Device Support) in your BIOS Security Tab (Trusted Computing)
If you have an AMD CPU, also enable fTPM or set it to Discrete

Enable Virtualization

Navigate to the Advanced or CPU Configuration tab
Set SVM Mode or Secure Virtual Machine to Enable

Disable Secure Boot

Delete Secure Boot keys
Disable Secure Boot in your BIOS Boot Tab

Enable Core Isolation (Windows)

Go on Windows and search "Core Isolation" and make sure it is ON.

Step 5: Install Drivers

Install essential drivers to ensure system stability.

Required Drivers

DirectX: Download DirectX

Visual C++: Download Visual C++

.NET Framework 4.8.1: Download .NET Framework

GPU Drivers:

NVIDIA: https://www.nvidia.com/en-us/drivers

AMD: https://www.amd.com/en/support/download/drivers.html

Step 6: Prepare Loader

You need to do these steps before using the Loader.

Disable Options at Network Adapter

Open the window with Windows + R, enter the command ncpa.cpl, right-click on the "Ethernet" or "WiFi" adapter you are using, and select Properties. In the window that opens, there will be many network settings. You will disable all of them, but the "QoS Packet Scheduler" and "Internet Protocol Version 4 (TCP/IPv4)" settings will remain enabled. If you disable all of them, you will not have an internet connection.

Timezone Setup

Go to Date & Time in your Settings
Turn ON "Set time automatically"
Turn ON "Set time zone automatically"

If the "Time zone" Box is Gray, follow these steps:

Search Location in the Search Bar
Then Allow Location Access
After Setup, Sync Time and move onto the next step

Step 7: Download Loader

Here are the steps you need to follow to inject the Spoofer. Make sure you go through each one carefully and in order for the inject process to work properly.

Download Spoofer Loader:

https://workupload.com/file/dJ89g8hja8n

Password: 123

Extract with WinRar

Use WinRar to extract the folder.

Download WinRar Tutorial: How to extract with WinRar

Step 8: Spoof HWID

How to spoof HWID.

Save Serials

Download Serial Checker: https://gofile.io/d/Swb2fg

Open the Serial Checker Tool and select all serial numbers (Press Ctrl + A) or take a picture
Copy the selected serials, then paste them into a text editor (e.g., Notepad)
Save the file in an easy-to-find location with a clear filename for later comparison

Run Spoofer

Run the loader as Administrator
Enter your purchased license key in the "Enter Your License Key" field
Run ARP Fix and wait for it to complete, then click OK
Next, run MAC Changer
Immediately after completing the ARP Fix and MAC Changer processes, close the Spoofer loader and run it again as an administrator

Spoofing (After Re-Opening Loader)

Click Regular Spoof
Wait for the confirmation pop-up, then restart the system when prompted
After restart, click Locked Spoof
Wait for the confirmation pop-up, then restart the system when prompted
After restart, click ASUS Spoof
Wait for the confirmation pop-up, then restart the system when prompted
When the process completes you will hear a beep indicating success

First, it will pause for a moment, and the loader will close automatically. After waiting a moment, you will see a message box that says, "Press OK to start SPOOFER." Click the OK button below the message box to start the second stage. Your computer will restart with a long beep.

After Restart

Compare your previously saved original hardware information with your new hardware information
Go to BIOS and disable TPM (Trusted Computing) in Advanced settings
When your computer starts up, launch the Spoofer as Administrator again and this time, click the TPM Bypass option
Your computer will automatically restart

Verifying TPM

Type tpm.msc in the window that opens with Windows + R. In the TPM tab that opens, check whether TPM is disabled. If you see a blue "i" symbol, it means it is disabled.

After completing the Spoofing process, if your serials changed, this means you are unbanned from all the games the Spoofer supports.

Step 9: Drive Clean Up

Install DriveCleanUp.zip: https://gofile.io/d/Swb2fg

Extract and run the .exe
If all Outputs say 0, restart your computer, and download your game
Select all devices that appear using CTRL + A and remove them using the Remove Device option by right-clicking

NOTE: If you connect any external disk or USB drive to your computer, remember to run DeviceCleanup.exe and clear the USB and external disk logs.

VGK Bypass (For Valorant Spoof)

Popup Bypass Instructions

Launch the game
After a few minutes, when the VAN9005 warning appears, click OK
Open the Loader. Click the VGK Bypass button once
You must repeat this process every time after you exit the game

Order: Restart your PC → Start again from Step 2/3. If you don't restart, you will encounter an error. Only When YOU EXIT THE GAME!

Fortnite / Rust Spoof

If you are trying to spoof for Fortnite and/or Rust, after following all the steps, follow the steps below to not get delay banned, or tournament kicks.